Make sure there are no flammable materials close to the unit while operating.
To prevent risk of fire or shock, do not expose fixture to rain or moisture.This product is intended for indoor use only!.Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.If you sell the unit to another user, be sure that he also receives this instruction booklet. Please keep this User Guide for future reference.Please read these instructions carefully, they include important information about the installation, usage and maintenance of this product. The laser power levels accessible if the unit is opened, can cause instant blindness, skin burns and fires. Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation. This unit contains high power laser devices internally. The laser unit must be installed in such a way that it can’t be moved under the effect of disruptions such as crowd movements, vibrations or gusts of wind.The laser unit must be installed out of reach of the audience and at a minimum of 3m above the ground where the audience is present or protected by a safety perimeter of 5m radius.Inside the public area only a scanning movement is allowed within the terms and conditions defined by the international technical laser safety report.The public area must be clearly identified by signs on the ground. The area called “public area” is defined by the space of 3m above the area occupied by the audience and a width of 2.5m around this area.Inside the public area, any laser shooting towards the audience is strictly forbidden except if a safety area of 5 m radius is marked around the area to which the audience cannot get access.Lasers of class 3 and 4 are for outdoor use only.Its installation and use should only be carried out by a skilled technician who is aware of the specific dangers of lasers.
It is meant exclusively for professional use.
This laser complies with the international standards EN60825-1:2014.
0 kommentar(er)
